Price 52.99 € incl. shipping. 2018 version.
You can purchase KessV2 hardware (FW v5.017, SW V2.32 clone, unlimited tokens, including set of cables) from EngineTuning.eu. Product is new and never used. Shipping worldwide. Order will arrive to your door in 2-3 weeks right after purchase (usually faster, depending on you location). It’s a great choice, because KessV2 unit will be shipped to you directly from supplier in China. Please note, that supplier declares lower price (20$) and you should receive unit without any additional TAX. But in some cases, usually in countries which have strict Customs policy, the units can be charged with additional TAX. Ordering from EngineTuning.eu will save your time and money. If you have additional questions please contact me.

Short review of KessV2 tool.

KessV2 is a chiptuning tool which allows you to easily read/write vehicle’s ECU. With such tool you are able to extract engine’s control program then edit it in your computer and increase your engine performance after writing it back. It’s either for home car owners who’d like to save on fuel, improve horse power, adjust driving comfort. In today’s market KessV2 is most powerful tool and everyone is able to purchase it. It supports almost all vehicles, as it means it is universal. The tool is safe, fast and reliable. I have been using KessV2 for a while and I have no complaints about it. Strongly recommended tool.

KESS-Tuning-Kit-Vehicles-Support.pdf – 92 KB
52.99 EUR

Price is 50.99€ incl. shipping. 2018 version.
You can purchase K-TAG tool from EngineTuning.eu as well. Product is new and never used. Shipping worldwide. Order will arrive to your door in 2-3 weeks right after purchase (usually faster, depending on you location). It’s a great choice, because K-TAG unit will be shipped to you directly from supplier in China. Please note, that supplier declares lower price (20$) and you should receive unit without any additional TAX. But in some cases, usually in countries which have strict Customs policy, the units can be charged with additional TAX. Ordering from EngineTuning.eu will save your time and money. If you have additional questions please contact me.

KTAG K-TAG ECU Programming Tool Master Version.

Hardware Version: 7.020.
Software Version: V2.31.

SUPPORTED VEHICLE/ECU LIST.
50.99 EUR.

You can purchase Autocom CDP diagnotics hardware (V2014.03) from EngineTuning.eu. Price is 42.99€ incl. shipping. Product is new and never used. Shipping worldwide. Order will arrive to your door in 2-3 weeks right after purchase (usually faster, depending on you location). It’s a great choice, because diagnostics unit will be shipped to you directly from supplier in China. Please note, that supplier declares lower price and you should receive unit without any additional TAX. Ordering from EngineTuning.eu will save your time and money. If you have additional questions please contact me any time.

Short review of Autocom CDP Pro tool.

This tool is used for diagnostics. Diagnostics and tuning are the very related things. I keep the opinion that only fault-free vehicle can be tuned and best result reached. So before tuning I strongly recommend to make sure that vehicle does not have any engine related faults (reading fault codes via diagnostics helps to identify and solve engine problems). If you do not have any fault codes, you are ok to go with the tune and expect the maximum power, torque and driving pleasure.
This is most powerful diagnostics tool, which I have seen for such low price. It supports many car makes. With this tool you can see all trouble codes of your vehicle (engine, abs, esp, gearbox etc). It allows you to delete these codes, see its description and other common things. Other available functions:
1) Climate control
2) Service reset
3) Airbags
4) Immobilizer
5) Programming (injectors, keys)
6) Live data

Compatible vehicle list:
Cars CDP Pro car list.pdf – 32 MB

If you want to purchase it, please email me!

Short review of MAGPro device. OUTDATED TOOL!

Recently I have bought this tool. As you already saw, I’ve already made a video with it. That was one of the vehicle’s I have tuned with that tool. Many more was tuned from that time… What I can say, this is the best tool what I have ever had (in this case when you read/write vehicle’s ECU from OBD-II port). It supports many vehicles, it is very reliable, – I have never had any type of errors; all the read/write processes went smoothly. I would recommend it to anyone, who are going to start remap own vehicle.
You may download its software on my site, under “Software” category.

Mag Pro2 V4.1 Supports Car List.pdf – 207.4 KB

BDM100 programmer

Short review of BDM100 programmer. OUTDATED TOOL!

BDM100 is BDM-100 ECU Tuning Programmer/ECU/Reader/Flasher.
BDM-100 is a universal reader and programmer that allows the user to read and program files in the ECU supplied with Motorola MPC5xx processors. BDM-100 requires the ECU to be opened and removed so that you can connect a flat cable to a specific area to the ECU. The other end of the BDM100 is connected to the USB port of any computer. BDM100 will allow you to create copies of the ECU software. Chip tuning of ECUs with Motorola MPC555 – 565.

It is good ECU reader/writer, it supports many types of ECUs. But there is one clue: you need to open your ECU, connect BDM’s adapters and then read/write (cable flashers do not need technical skills). It needs technical skills.

BDM100 programmer support Device.pdf