05/02/2025

BDM100 programmer (OUTDATED TOOL!)

BDM100 programmer

Short review of BDM100 programmer. OUTDATED TOOL!

BDM100 is BDM-100 ECU Tuning Programmer/ECU/Reader/Flasher.
BDM-100 is a universal reader and programmer that allows the user to read and program files in the ECU supplied with Motorola MPC5xx processors. BDM-100 requires the ECU to be opened and removed so that you can connect a flat cable to a specific area to the ECU. The other end of the BDM100 is connected to the USB port of any computer. BDM100 will allow you to create copies of the ECU software. Chip tuning of ECUs with Motorola MPC555 – 565.

It is good ECU reader/writer, it supports many types of ECUs. But there is one clue: you need to open your ECU, connect BDM’s adapters and then read/write (cable flashers do not need technical skills). It needs technical skills.

BDM100 programmer support Device.pdf

ECU remap benefits on different engine types

Petrol (not turbo)

Petrol (turbo charged)

Diesel (turbo charged)

Tuning this type engines will produce 5-10% BHP.

Tuning a petrol engine with turbo, will produce extra 10-20% BHP.

Tuning a diesel turbo engine will produce 20-40% bhp.

The engine will be more responsive to acceleration.

The engine will be significantly more responsive with power which comes immediately.

Diesel engine produces the most impressive power and torque gains. This is best to tune diesel engines.

About EngineTuning.eu

Welcome, folks. I am happy if you visited my site and found something useful for you. This is site about vehicle’s ecu tuning. I am interested into ecu tuning, so I created this website, where I can share my experience with other people who look into this.
I have a huge archive of tuning files, this archive was made by world-wide chiptuners. These files are not made by real professionals, so before using you should learn a little bit about chiptuning and check file for “dumb” mistakes. Check tuning files download page in the menu (it contains remaps for ALL car makes!). Anyway, remapping diesel engine there is no possibility to damage engine, always you can write back your original file. But be careful with petrol engines! Bad remap can blow off your petrol car’s engine.
In this you will find much information about ecu tuning. Software, hardware reviews, videos, articles, tuning files and other information.
Little bit more information about ecu remaps:
Chip tuning refers to changing or modifying an EPROM chip in a car’s or other vehicle’s electronic control unit (ECU) to achieve better performance, whether it be more power, cleaner emissions, or better fuel economy.
Question:
-How much money does the remap (chiptuning) costs at chiptuning companies?
Answer:
It costs around 500-1000$. The companies only takes your car and upload to it chip-tuned file, which is prepared long time ago… And take lot of money. Why you should pay so much money, when you can remap car yourself? It is not very hard. The main thing is to get a good re-map file. The rest of the job is quite easy.

The aim of chiptuning is:
To significantly increase power and torque over entire rpm range of the engine, especially on turbo charged engines. Here you will have the impression, after the optimization is done, to own a entirely diffrent car or to have changed into the next higher vehicle class.

Winols 1.5 with pdf tutorials, damos


WinOLS is an application, which is written especially to modify the memory contents of Engine Control Units (ECUs).
It makes it easier to search and find maps, which can be named, displayed in several ways and be modified. All data and maps are stored in project files. These project files contain all information, which are gathered during the modification of the ECU. Additional data can be added too.
[Read more…]

My own vehicle remaped

Here you can watch my own vehicle – Ford Mondeo 2.2 ST TDCi remaped acceleration video. Accelerating from 0 to 160km/h. Shifting from first to third (simple trick on diesel engines, – high torque on low rpms).

Renault Espace 1.9 dCi chiptuning

Here is my second video. In this video I’ll show to you how chiptuning works in real life. Pay attention, that it is only writing process, I didn’t filmed reading process, because it looks same like writing.

https://www.enginetuning.eu/tuning-files/tuning-files-tested-by-me/

Introduction to chiptuning

Hello. This is my first video. Watch and see that introduction. You will see some tools, software, hardware things.

ECU tuning files download

Most of files are tested tuning files. These files are working. To use these files on your car you will need ECU flashing tool. This unit will allow you to chip tune your vehicle via OBD-II port. Look into “Hardware” menu to find suitable flasher for you. There are almost ~20 thousands tuned files, you should find one, which will fit your car. Please note, that this big package of tuning files is mostly for older vehicles and isn’t collected personally by me. This package is created and contains files from many different tuners. So files in this package are listed in many different folders and it could be hard to find a specified file for beginners. Use these files at your own risk.
[Read more…]

Contact me

Emails with questions should be sent to info@enginetuning.eu.

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close